It’s a summer day and it’s sweltering outside and at that moment you want to drink some tasty beverage. You have a KitchenAid ice maker but when you open the ice maker you see that it’s not working which makes you wonder, why is my KitchenAid ice maker not working?
In these types of situations, when you want a nice cold drink on a boiling hot day but the ice maker is not working makes you vexed. These type of kitchen appliance are very useful and makes us addicted to their comfort.
Also, that situation makes you worried because you think that now you have to spend money on that unnecessarily. Now you don’t have to worry anymore.
In this blog, I am going to tell you almost all the reasons why the ice maker is not working and their solutions. I assure you that you don’t have to spend a large amount of money on these problems. Almost every problem can be solved at home only.
If you have any other ice maker then check our ice maker troubleshoot post.
Check the power connection
This is the most common mistake people make. They forget to give the supply of electricity to the ice maker and think that the ice maker is not working. Well, this is the truth, almost twenty-five percent forget to give the power to the ice maker.
The first thing you should do is check the plug of the ice maker, whether the plug of the ice maker is plugged in or not. If it is plugged in properly then check whether the switch is on or not. If the switch is not on then on the switch give the electrical connection to the ice maker. After giving the power connection your ice maker will start working.
It sounds amusing but it is true. People often forget to give the power connection to the ice maker and think that the ice maker is not working. Well if you have given the power connection and your ice maker is still not working then we should move forward to our next problem.
Check the water supply
Your KitchenAid ice maker needs a stable supply of water to make ice. As we all know the major component for making ice is water and if the supply of water supply is not proper then the ice maker will stop making ice.
If the water supply is improper then check the pipeline. the pipeline can get clogged due to dirt or the minerals stored inside the pipeline. if there is dirt then clean the pipeline with the help of a thin stick or a thin strong wire.
Once the pipeline is cleared put the pipe where it was attached and then give the water supply. After doing this your water supply will become normal and your ice maker will start making ice again.
Check the pressure of the water
To make ice your Kitchen Aid ice maker needs proper water pressure. If the pressure of water is low then it will stop making ice and if it continues to make ice then it will make uneven ice or the ice will be hollow.
The ice maker needs a water pressure of twenty(20) psi. if the pressure reduces then the ice maker will start malfunctioning. If the water pressure is improper then check the water supply line and if there is dirt inside it, clean the dirt.
After removing the dirt from the water supply line check the water pressure. Water pressure can be checked by the water pressure gauge which you can buy from the market. When the water pressure becomes correct reattach the water supply line to the ice maker and it will start working again properly.
Fault in water inlet valve
This is the main reason for water-related faults in the ice maker. In simple words, the water supply line is connected to the water inlet valve. When the ice maker is making ice the water inlet valve should be open as it needs water to make ice. As time passes the water inlet valve gets blocked by the mineral deposit in the valve or it gets electrically failed.
If the water inlet valve is blocked by the minerals deposit then you can clean the valve properly and after cleaning open the valve again. You will know when the valve is blocked because it will make a humming sound but it will not let the water pass through it. If the water inlet valve is blocked by the minerals then changing the valve is a better option than cleaning it.
If the water inlet valve is electrically failed then there is no other option than to replace the water inlet valve with the new one. After replacing the water inlet valve your ice maker will start getting proper water supply and proper water pressure. Also, the ice maker will start making ice as it used to make earlier.
Temperature control of the ice maker
Sometimes by mistake, people set the temperature of the ice maker according to themselves. If the temperature of the ice maker is too warm then it will not make ice properly. It starts making uneven and small ice. Sometimes it stops freezing also.
You have to keep the temperature according to the ice maker user guide, you cannot set the temperature however you want to set it. This may lead to big issues and damage the ice maker. The average temperature of an ice maker is zero degrees Fahrenheit to five degrees Fahrenheit (0 F – 5F) which means minus fifteen degrees Celsius to minus eighteen degrees Celsius (-15 C – -18 C).
Sometimes people do this by mistake also, You don’t have to worry just check the temperature control and set it right. In your KitchenAid ice, there is a temperature control button under the freezer you can set the temperature from there.
Defect in sensor control
In your KitchenAid ice maker, there is a sensor that checks the level of water in the ice maker mold. It ensures the accuracy of the ice and also checks the consistency. It also checks the water pressure also. This sensor is known as the sensor control of the ice maker. With the help of sensor control, the ice maker makes ice.
The sensor checks the water level, when the water reaches the desired level it tells the ice maker to stop the flow of water. When this sensor gets defective the ice maker stops working because in one way you can say that the sensor is the brain of the ice maker. When the sensor gets defective the ice maker starts malfunctioning.
If your sensor control is defective or stopped working then call the professional to repair it because it is an internal problem and you cannot do anything if don’t have knowledge of the internal parts of the sensor. When the sensor is fixed the ice maker will start working again properly
The water filter is clogged
The water filter in your ice maker filters the water and makes the water pure for making ice. After some months the water starts clogging by the minerals in the water and when it’s completely clogged it will stop the water from passing through it.
When your ice maker’s water filter gets clogged it will stop the water from passing through it. After this the ice maker will not get water and it will not be able to produce ice. You will get an idea before the water filter gets totally clogged because the ice water will start tasting bad.
If your ice maker’s water filter is clogged then clean the water filter properly and fix the filter. In my opinion, it is better to change the water filter than to clean it if the filter is totally clogged. It is also recommended that you should clean your ice maker’s water filter every six months to increase the life span of the ice maker.
Mechanical problems
Your ice maker is a machine and it is very normal to have mechanical issues. The main mechanical issue that can affect the ice maker is overheating and the other is making noise. These issues are very common in machines and these problems can be solved.
If your ice maker is getting heated after very few hours of making ice then there can be some reasons behind it. The main reason behind it is the outer temperature. Yes, it is true that the outer temperature can overheat the ice maker. To stop it from overheating make the surroundings cool. Another reason for overheating is dust accumulated on the compressor, clean the compressor properly so it can remove the heat outside properly.
If the ice maker is making noise then check whether any part of the ice maker is loose. If there is any loose part then tighten the part properly with the help of a screwdriver and it will stop making noise. Also, check whether there is any old rusted part. If there is any lubricate that part nicely and move that part for few times it will stop making noise. Also, lubricate the parts whenever you get the time and maintain the ice maker properly.
The ice maker is defective
It can be the reason and it is normal. In the manufacturing factory, there are some exceptions that are defective. It means your ice maker is defective from the manufacturing department, there is not your fault in it, so you don’t have to worry about it.
If your ice maker is defective then call the company and tell them your problem, They will change your ice maker and give you a new one and take the defective ice maker with them. Keep one thing in mind that your ice maker should be in the warranty period, if your ice maker has crossed the warranty period then they will not replace it.
Issue in the major components
Well, the ice maker works on its major components and if any of them gets defective the ice maker will stop working. The major components of the icemaker are the compressor, motor, sensor, and control panel.
If one of the major components will stop working or gets faulty then the whole ice maker will stop working. If your major components are defective or got faulty by any means then you have to call the service center. The major components cannot be repaired at home by us. These components can be fixed by the professionals only.
Once these components are fixed then your ice maker will start working again.
FAQ
How to reset KitchenAid ice maker?
To reset the ice maker you have to press the reset button for a few seconds, generally, it takes 5 seconds to start resetting. If you do not have the reset button then press the white bail button until you then the click sound twice.
Why is my KitchenAid ice maker not making ice?
There can be several reasons for that, mainly faulty inlet valves, clogged water filters, wrong temperature control, improper water supply, improper water pressure, and many more.
Why is my ice maker not filling with water?
If your ice maker is not filling the water there is a fault in the water inlet valve, Check the valve properly if there are minerals stored then change the valve. There can be a frozen water line also, for that you have to set the proper temperature according to your manual guide.
Why is my ice compartment not freezing?
If your ice compartment is not freezing properly then check the thermostat of the freezer, if the temperature is wrong then set the temperature according to the manual guide, and your ice compartment will start freezing again.
What temperature should I set my KitchenAid ice maker?
The temperature of the ice maker should be between is zero degrees Fahrenheit to five degrees Fahrenheit (0 F – 5F) which means minus fifteen degrees Celsius to minus eighteen degrees Celsius (-15 C – -18 C).
Conclusion
The KitchenAid ice maker is a fantastic ice maker and I will suggest people use this ice maker if they want an ice maker. There can be problems with the ice maker but now you have solved the issue and I am happy for you. If this information helped you then it is my pleasure. Now you have solved the issue and your ice maker is making ice again. Now you can enjoy your cold beverage with loads of ice in it.